Antenna Kit E - Wideband 1x Parabolic

  1. Mount the omnidirectional antenna. Please refer to the Omnidirectional Antenna section.

  2. Assemble the parabolic antenna to the support placed in the PCS: screw the four grey screws through the antenna into the support.

../imgs/antenna_pcs_screws_1.png
../imgs/antenna_pcs_screws_2.png
  1. Once mounted, the layout with the parabolic antenna should look as follows:
../imgs/wide_parabolic_1x_mounted.png
  1. Connect the omnidirectional antenna to the SMA port RF4 and the parabolic antenna to RF2.
../imgs/rf_connectors.png

© 2026 Embention. All rights reserved.